Hi, today’s post is about some photos about cable connection (Part 2). .Actually properly connected cable is needed for the proper data flow through a network. If there is a problem of cable, then there may be a problem of data flow, though good equipment is used there.
For the importance of the connection of cable, i can share you my personal experience. I was making a LAN connection between the two PCs. As you can know this type of connection is most simple and most easy. So i bought the cable and other equipments from the market. I thought that, all the equipment are ok. So i didn’t use cable tester to check the cable. I made a LAN cable with that cable and with the other equipments. When I connected the two computers through the cable, i saw that, there is no connection between them. I can’t able to discover what is the problem. I checked the every sharing option of the two computers. The computers we running in same operating system. So it became very difficult for me to find out the exact problem. If the problem can find, then i can take help from internet and may find the problem. So I decided to check all the parts of this LAN connection. At first I checked the two computers. They were OK, as i didn’t find any problem in that two computer. After that I test the cable with a cable testes. So I find that the data was not passing through the cable and that was the problem. So I again bought a cable from a market and check that cable with the cable tester. The second cable was OK. And finally i can be able to make a new LAN connection with that cable. So you i think that proper cable and its connectivity is important for a networking system. Here is some photo gallery for the cable and its connection.
Leave a Reply